6106C01 SHSpec-5  Flattening Process and E-meter

     On running a prehav level, be sure that you run the process long enough
to get it to bite.  When the PC needs a high sensitivity for a third of a dial
drop, you may not get much TA in the first three hours.  This can happen on a
sticky level at any time.  It is not flat, or it wouldn't read in the first
place.  So run the TA in, then out.  If it is getting a little TA and never
did get much, you are getting some TA, and you want to continue to increase
it.

     The goal becomes less intense when you find the terminal.  This is
because the goal is the significance that surrounds the terminal, and the PC's
attention has been yanked off the goal over to the terminal, where it was
fixed anyway.  So the goal, after you have found the terminal, will read less
than the terminal.  There's nothing in the goal for his attention to be fixed
on, since the goal is just something he achieved reactively to solve a problem
given him by a terminal that overwhelmed him.  The goal is the tag hanging out
from the bank and can be used to get in there and handle the bank.  This
phenomenon of tags was first noticed in 1949 with engrams.  For instance, with
a boy who is always worried about red caps, it turns out that red caps were in
an engram about which he knows nothing.  Goals work the same way.  The goal
that won't null is the toughest one, the one attached to the terminal that
most overwhelmed the PC -- that he can still confront.